Answers are grounded in this paper and cite their sources.
Developing highly efficient adsorbents is one of the most feasible strategies to achieve oil-water separation. Conventional sponge adsorbents often suffer from limited capacity, poor cyclic stability, and low selectivity. To overcome these limitations, in this study, we synergistically modified a commercial polyurethane sponge using MIL-53(Al) and dimethylsilicone oil (DMS) via a facile dip-coating strategy, resulting in the M/Si-6@PU sponge. Through the optimization of the synthesis process, the dual-modified sponge evinced a water contact angle of 140° and an oil contact angle of 0° in air. This super-wetting property significantly accelerated the oil absorption process, reducing the absorption time by 48% (2.6 s compared to 5.0 s for the pristine polyurethane (PU) sponge). Meanwhile, this sponge exhibited outstanding adsorption capacities for various oils, including toluene (43 g·g − 1 ), pump oil (40 g·g − 1 ), diesel (39 g·g − 1 ), vegetable oil (35 g·g − 1 ), soybean oil (33 g·g − 1 ), and real oily wastewater (31 g·g − 1 ). Furthermore, the sponge maintained a high separation efficiency (> 99.0%) for oily sludge thermal washing wastewater over 8 cycles, with the efficiency remaining robust at 93.6% after 30 cycles. The composite also exhibited excellent chemical stability, retaining its hydrophobicity after 1 h of immersion in extreme pH environments (pH = 1 and 12). Therefore, the synergistic combination of hierarchical roughness and low surface energy renders the M/Si-6@PU sponge a highly promising candidate for practical and harsh industrial oily wastewater treatments.
No takes yet. Share an insight, caveat, or question.
Pan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: