Answers are grounded in this paper and cite their sources.
NiO and ZnO were employed as model oxides to investigate the relationship between interfacial reactions and metal-oxide reduction under lithium-ion battery operating conditions using X-ray absorption fine structure (XAFS). On initial reduction during the first discharge, the capacities of the NiO and ZnO electrodes substantially exceeded their theoretical values. In situ two-dimensional imaging XAFS analysis determined the capacity range over which reduction from metal oxide to metal occurred. The analysis revealed that a component corresponding to lithium carbonate was generated within the electrode in the capacity range preceding reduction and that the X-ray absorbance at the Ni or Zn K-edge decreased. We suggest that a low-density, Li + -containing solid electrolyte interphase (SEI) is generated within the electrode by the reductive decomposition of electrolyte solvents before metal-oxide reduction. During the subsequent oxidation reaction on the first charge, Ni and Zn were oxidized to their oxide states, consistent with possible retention of oxygen-containing products within the electrode composite at the previous reduction process. The nearly identical reduction voltages observed for NiO and ZnO during the first discharge may be associated with the formation of a comparable Li + -containing SEI. XAFS imaging of chemical-state changes across the entire electrode sheet revealed that, although the capacity at which metal-oxide reduction became detectable varied across the electrode, the pre-edge absorbance decreased first at all analyzed locations. These results suggest that the Li + -containing SEI plays an important role in establishing the interfacial environment preceding the conversion reactions of the NiO/Ni and ZnO/Zn couples.
No takes yet. Share an insight, caveat, or question.
Hachiuma et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: