Answers are grounded in this paper and cite their sources.
Photocatalytic pervious concrete combines stormwater infiltration with the removal of urban air pollutants, but its mechanical, hydraulic and catalytic performance depends on interdependent mix parameters. A Taguchi L16 design with Grey Relational Analysis (GRA) and Principal Component Analysis (PCA) was used to evaluate four factors at four levels, water/binder ratio (A), aggregate/binder ratio (B), TiO₂ content (C) and surface spray time (D), on eight responses: compressive, split tensile and flexural strength, permeability, porosity, skid resistance, sandpaper peeling loss and the NOₓ removal efficiency measured after hydraulic exposure. The signal-to-noise ratios of all responses were normalized as larger-the-better and weighted by the principal components explaining 89.4% of the variance. Mixture M12 (A3B4C2D1: water/binder 0.40, aggregate/binder 4.5, 5% TiO₂, spray on the day of casting) ranked first under all six weighting schemes examined, with a weighted grade of 0.720, a compressive strength of 44.67 MPa, a permeability of 11.64 mm/s, a sandpaper peeling loss of 0.58% and a NOₓ removal efficiency of 82.86% after one permeability exposure, while M3 and M8 formed a leading group with it within the uncertainty of the responses. The predicted optimum A1B4C3D3 remains unverified and is not predicted to exceed M12. With yield-corrected quantities, the cradle-to-gate GWP of M12 was 339 kg CO₂-eq/m³, 8% above a conventional pervious concrete, the TiO₂ contributing 16%; the NOₓ removal was quantified as an air-quality benefit without a climate credit.
No takes yet. Share an insight, caveat, or question.
Khan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: