Answers are grounded in this paper and cite their sources.
The creation of high-performance and low-cost materials has gained significance in addressing the rising need for sustainable engineering applications. In this study, a fiber-reinforced epoxy composite was created with JUCO (jute-cotton composite) and the addition of Al 2 O 3 filler to improve the mechanical performance. The hand lay-up method was used to fabricate composites with different filler contents, and they were tested. The findings show that the addition of fillers improves the mechanical strength of the composites. The highest tensile strength was obtained at a filler content of 2.5 wt% (not significantly different from 5 wt%) and the highest mean flexural strength was obtained for the heat-treated 5 wt% composite. Moreover, the flexural strength of the heat-treated 5 wt% composite (101.3 MPa) was higher than that of the non-heat-treated 5 wt% composite (94.1 MPa), although this difference was not statistically significant, and about 45% higher than that of the unfilled composite (69.8 MPa). The experimentally measured material properties were used to conduct a finite element simulation of automotive components, the car body, and the crash box to assess their numerical feasibility for automotive use. The heat-treated 5 wt% composite was simulated under compressive and impact loading, which is relevant to automotive structures; this is a preliminary numerical result. The results indicate that the innovative hybrid composite of JUCO with an Al 2 O 3 filler is a promising candidate for low-cost industrial and automotive parts, subject to physical structural validation.
No takes yet. Share an insight, caveat, or question.
Pritha et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: