Answers are grounded in this paper and cite their sources.
This study investigates the low-cycle fatigue (LCF) behavior of twin-free bi-textured AZ31 Mg sheets produced by a pre-compression and annealing (PCA) treatment consisting of rolling-direction (RD) pre-compression to 3% and 6% plastic strain followed by annealing at 400 °C for 1 h (designated 3PCA and 6PCA). The as-rolled (AR) sheet exhibits a normal-direction (ND)-oriented basal texture. RD pre-compression introduces an RD-oriented component through {10–12} extension twinning, and annealing removes residual twin boundaries while preserving the twin-induced reorientation. Consequently, 3PCA develops a twin-free bi-texture dominated by the ND-oriented component, whereas 6PCA is dominated by the RD-oriented component. These texture states yield markedly different tension–compression asymmetries, with compressive-to-tensile yield strength ratios of 0.47, 0.92, and 1.54 for AR, 3PCA, and 6PCA, respectively. Under fully reversed strain-controlled LCF loading, fatigue life increases in the order AR < 3PCA < 6PCA. This improvement is attributed to texture-dependent variations in slip, {10–12} twinning, and detwinning during the tensile and compressive half-cycles. Correspondingly, the half-life mean stress shifts from tensile in AR to nearly zero in 3PCA and to compressive in 6PCA, indicating that the PCA-induced bi-texture governs cyclic stress asymmetry. Fractographic and electron backscatter diffraction analyses reveal surface crack initiation without coarse internal defects and a consistent tendency for the examined crack-initiation sites to occur in ND-oriented grains in the PCA samples. Furthermore, a mean-stress-corrected effective damage parameter, P eff = ΔW p + 2.04( σ m × ε a ), predicts fatigue life more accurately than the conventional total-strain-energy model, reducing the root mean square error from 0.125 to 0.104 and increasing R ² from 0.914 to 0.940. Overall, twin-free bi-texture engineering enhances the LCF resistance of AZ31 sheets by tailoring deformation-mode partitioning, regulating the mean-stress state, and reducing effective fatigue-damage accumulation.
No takes yet. Share an insight, caveat, or question.
Woo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: