Answers are grounded in this paper and cite their sources.
Abnormal grain growth (AGG) is frequently observed during the heat treatment of Mg alloys and is generally considered detrimental to mechanical performance. Here, controlled heat treatment was employed to produce two distinct microstructural states: a relatively homogeneous-grained Sample-1 and a Sample-2 containing a heterogeneous grain structure associated with AGG, together with a reduced eutectic fraction and an increased density of β′ precipitates. Compared with Sample-1, Sample-2 exhibited an improved strength-performance balance at room temperature, 200 °C, and 250 °C, achieving 243.4 MPa strength and 1.8% elongation at room temperature, 262.2 MPa and 4.9% at 200 °C, and 242.7 MPa and 3.9% at 250 °C, respectively. At room temperature, the enhanced precipitation strengthening associated with the increased β′ precipitate density compensates for the reduction in grain-boundary strengthening caused by grain coarsening, while the lower fraction of brittle eutectic particles suppresses crack initiation. Loading–unloading–reloading tests further reveal comparable hetero-deformation-induced stresses in the two samples, indicating that the heterogeneous grain structure provides only a limited additional HDI-strengthening contribution under room-temperature deformation. At elevated temperatures, pronounced differences in deformation behavior develop between the fine- and coarse-grained regions. Increased KAM values, LAGB density, twinning activity, and crystallographic orientation evolution in the fine-grained regions indicate enhanced local lattice curvature and plastic accommodation, facilitated by extension twinning and grain-boundary sliding. Meanwhile, the occurrence of compression twins in the coarse-grained regions is consistent with a locally altered stress state containing a compressive component arising from deformation incompatibility between the two regions. These observations suggest that temperature-dependent strain accommodation and stress redistribution within the heterogeneous grain structure contribute to the improved high-temperature strength–ductility synergy of Sample-2. The present results demonstrate that the mechanical response associated with AGG is governed by coupled changes in grain structure, residual eutectic constituents, and precipitation behavior, and provide insights into the microstructural design of heat-resistant Mg alloys.
No takes yet. Share an insight, caveat, or question.
Sui et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: