Answers are grounded in this paper and cite their sources.
The low productivity of passive solar stills remains a significant challenge. To address this limitation, this study investigates the incorporation of silicon carbide (SiC) into black paint to enhance freshwater production in pyramidal solar stills. Three pyramidal solar stills were evaluated using brackish water in two experimental stages. Initially, the three systems were tested with conventional black paint. Subsequently, the same solar stills were evaluated with black paint containing 20% ( w / v ) SiC, considering water depths of 1, 2, and 3 cm. Material characterization using X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) provided insights into the crystalline structure and characteristic spectral bands of SiC and the coating, while particle size analysis revealed a mean particle diameter of 1.38 μm. UV–Vis spectroscopy revealed optical transmittance below 2% for the SiC dispersion. The results showed that the incorporation of SiC increased distillate productivity by 14.26%, 31.63%, and 11.30% at water depths of 1, 2, and 3 cm, respectively, reaching 3333, 2992, and 2235 mL.m −2 .day −1 . With the incorporation of SiC, the exergy efficiencies were 6.20%, 5.30%, and 5.15% for solar stills D1, D2, and D3, respectively. Furthermore, the system exhibited potential for mitigating CO 2 emissions throughout its operational lifetime. Following desalination, the physicochemical parameters of the produced water were within the limits established by applicable standards. The originality of this study lies in the direct incorporation of SiC into the paint matrix, an approach not previously reported in the literature.
No takes yet. Share an insight, caveat, or question.
Dantas et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: