Answers are grounded in this paper and cite their sources.
Next‐generation wireless systems demand monolithic three‐dimensional (3D) system‐on‐chip architectures to overcome planar scaling limits and reduce interconnect delays. Realizing this back‐end‐of‐line (BEOL) integration on complementary metal‐oxide‐semiconductor (CMOS) platforms requires ultracompact, high‐performance radio‐frequency (RF) switches. Here, we present a non‐volatile RF switch based on a monolayer hexagonal boron nitride (h‐BN) memristor employing an Ag/h‐BN/Ag structure. The device exhibits a low SET voltage of 1.11 V and stable endurance exceeding 500 cycles. At 20 GHz, it achieves an insertion loss of 0.81 dB and an isolation of 32.91 dB, enabled by a low on‐resistance ( R ON ) of 4.3 Ω and an ultralow off‐capacitance ( C OFF ) of 1.8 fF, corresponding to a cut‐off frequency ( F CO ) of 20.5 THz. To verify its feasibility at the circuit level, the h‐BN RF switch was applied to an LC ‐type voltage‐controlled oscillator ( LC ‐VCO), whose inductance can be reconfigured. The simulation results indicate that modulating the switch state and thereby changing the effective inductance enables wideband frequency tuning from 1.44 to 7.45 GHz, corresponding to a frequency tuning range (FTR) of 135%. These results verify the feasibility of the atomically thin h‐BN RF switch for inductor switching in reconfigurable LC ‐VCOs, presenting a promising route toward miniaturized high‐frequency circuit designs.
No takes yet. Share an insight, caveat, or question.
Seo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: