Answers are grounded in this paper and cite their sources.
Phase-change materials (PCMs) increase the thermal storage capacity of solar air collectors, but their combustible content raises concerns regarding façade fire safety. This study quantified the influence of structural material on fire development in three geometrically identical, PCM-integrated ventilated solar air collectors measuring 640 × 400 × 1250 mm. The collectors were constructed from oriented strand board (OSB), polyurethane-core sandwich panel, and galvanized steel sheet and were exposed to an external ignition source under a forced-air flow rate of 60 m³/h. Cavity temperatures, surface thermal fields, and specimen mass were recorded using K-type thermocouples, infrared thermography, and an electronic weighing platform. Comparative heat release rate (HRR) was estimated from the measured mass-loss rate and material calorific values. The OSB collector produced the highest temperature, 1040.7 °C, and an HRR plateau near 1000 kW between approximately 650 and 1200 s. The sandwich-panel collector reached 932.2 °C and an HRR plateau of 800–830 kW, while the galvanized-steel collector reached 853.3 °C and 650–670 kW. Relative to OSB, peak temperature decreased by 10.4% for the sandwich panel and 18.0% for steel, while peak HRR decreased by approximately 17% and 33%, respectively. The resulting temperature and estimated HRR datasets provide comparative experimental reference data for future numerical investigations of PCM-integrated solar air collectors and ventilated façades, subject to the limitations and uncertainties associated with the mass-loss-based HRR estimation method.
No takes yet. Share an insight, caveat, or question.
Ovadiuc et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: