Answers are grounded in this paper and cite their sources.
Microwave material processing has emerged as an advanced and energy efficient manufacturing technique owing to its rapid volumetric heating, shorter processing time, and eco-friendly nature. In the present investigation, SS316 + 15%EWAC + x VC ( x = 3, 5, and 10%) metal-ceramic composite castings were successfully developed using microwave hybrid heating operating at 2.45 GHz and 900 W. The developed composites were characterized using metallurgical (scanning electron microscopy/energy-dispersive spectroscopy, X-ray diffraction), mechanical (Vicker's microhardness), and tribological analyses using scanning electron microscopy/energy-dispersive spectroscopy, X-ray diffraction, Vicker's microhardness testing, and pin-on-disk wear testing. Microstructure study revealed that the uniform melting of SS316 matrix material with random dispersion of vanadium carbide-reinforced particles throughout the composite X-ray diffraction analysis confirmed the formation and presence of hard carbide phases, which significantly contributed to the microhardness enhancement. The Vicker's hardness of the composite increased progressively with vanadium carbide content and the maximum microhardness of 690.13 ± 245.16 HV was achieved for the SS316 + 15EWAC + 10VC cast. Tribological study results revealed that wear resistance of the cast sample improved considerably with increasing vanadium carbide reinforcement content. The minimum cumulative weight loss was observed for the SS316 + 15EWAC + 10VC at 1 m/s of sliding velocity and 2 kg of normal load. Scanning electron microscopy-based fractographical analysis of the worn surface indicated a transition in wear mechanism from severe adhesive-abrasive wear to mild oxidative wear with increasing vanadium carbide content.
No takes yet. Share an insight, caveat, or question.
Pal et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: