Answers are grounded in this paper and cite their sources.
In this study, the high-temperature corrosion behavior of the pulsing current gas tungsten arc welded (PCGTAW) Alloy 625 fabricated with ERNiCrCoMo-2 filler was evaluated at 700 °C in a molten K 2 SO 4 –60%NaCl salt mixture and in an air atmosphere. The microstructure analysis of the weldment shows the existence of columnar and cellular dendrites in the weld region. The weight gains of the air-oxidized and corroded weldments are 0.236 and 1.413 mg/cm 2 , respectively. The surface microstructure and oxide phases of the thermally exposed weldments were examined. The test results revealed that the weldment was more prone to spallation and higher oxidation in molten salt conditions due to sulfidation and chlorination. Minimal oxidation and minimal failure were observed in the air oxidation environment. Furthermore, a complex corrosion mechanism was derived for the alloy-weld region based on its composition and microstructure.
No takes yet. Share an insight, caveat, or question.
Sujai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: