Answers are grounded in this paper and cite their sources.
Sequential dual curing enables staged shaping of multifunctional thermosets. DGEBA/thiol/1-methylimidazole composites containing multi-walled carbon nanotubes (MWCNT), graphene nanoplatelets (GNP), Fe3O4 or Fe2O3 were assessed for curing, morphology, thermomechanical properties, electrical and thermal transport, self-heating, shape memory, de-icing, shielding, strain sensitivity, wettability, storage stability and stress relaxation. Carbon fillers (thiol:epoxy ratio r = 0.7) and oxides (r = 0.8) used matching unfilled controls and volume-fraction normalisation. MWCNT enabled electrical actuation and in situ curing, with a model-free percolation bracket of 0.003–0.006 vol % and 18.6 dB shielding at 0.10 vol %. GNP favoured thermal management and electrothermal de-icing: thermal conductivity rose from 0.20 to 1.25 W m−1 K−1, the critical Joule field fell below 1 V mm−1 and the average-to-maximum overheat ratio reached 0.9. GNP also achieved 24 dB shielding. Fe3O4 favoured thermomechanical reinforcement, raising Tg by 13.6 K at 1.2 vol %; shape fixity reached 99.7%. Fe2O3 favoured contactless heating, reaching a 100 K average overheat at 85–165 mT. Representative formulations showed stress relaxation consistent with bond exchange, with filler-induced changes in mean relaxation time at 180 °C within a factor of 1.5. Activation energies were 74–89 kJ mol−1; Arrhenius extrapolation predicted mean relaxation times of 30 min at 184–195 °C, below the reported 225 °C stability limit. Filler selection must preserve the second cure.
No takes yet. Share an insight, caveat, or question.
Collado et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: