Answers are grounded in this paper and cite their sources.
Three-dimensional polymeric microstructures are widely used as controlled in vitro microenvironments for biomedical applications, but their fabrication fidelity and fluorescence background represent challenging issues. This study compares arrays of micropillars made of low autofluorescence polymer IP-Visio with IP-Visio incorporating 4 mg/mL PEG-coated iron oxide magnetic nanoparticles (MNPs). Micropillar arrays (designed to have 5 µm in width and heights between 5 and 55 µm) were fabricated at laser powers between 24 and 62.4 mW and examined by optical and fluorescence microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and atomic force microscopy. The maximum freestanding pillar height was increased from 20 µm for IP-Visio pillars (aspect ratio of 5.80:1) to 35 µm for IP-Visio + MNPs pillars (aspect ratio of 9.79:1). The tallest IP-Visio pillars were obtained for a broader range of laser powers, i.e., at 43.2, 57.6, and 62.4 mW, whereas the tallest IP-Visio + MNPs composite pillars were obtained at a much narrower window, centered at 48 mW. The laser-power dependence of pillars’ width was weaker for the IP-Visio + MNPs composite, with a fitted slope approximately 37.9% lower than for IP-Visio pillars. In addition, the IP-Visio_MNPs composite pillars showed more pronounced laser-writing tracks and higher reported RMS roughness as compared to pillars made by IP-Visio (625.2 versus approximately 366 nm). Elemental analysis revealed localized Fe-containing regions within the laser-printed IP-Visio + MNPs composite. Furthermore, fluorescence background signals were generally weak in the FITC and Rhodamine channels for both IP-Visio and IP-Visio + MNPs composite pillars, whereas the latter exhibited pronounced variability in the DAPI channel. Collectively, these findings highlight the trade-offs among achievable freestanding geometry, exposure sensitivity, surface texture, and optical background when using low-autofluorescence photoresists, while demonstrating that MNPs incorporation further influences these properties.
No takes yet. Share an insight, caveat, or question.
Ghita et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: