Answers are grounded in this paper and cite their sources.
Resonant piezoelectric composite structures provide high output through structural resonance, but their performance is often sensitive to frequency mismatch, load variation, and changes in contact conditions. This study develops a frequency-tolerant resonant quadruped robot using piezoelectric–carbon-fiber composite beams and a Contact-Modulated Inertial Driving (CMID) mechanism. Each driving leg consists of PZT-5H piezoelectric layers bonded to a carbon-fiber substrate. Under asymmetric sawtooth-wave excitation near the first order bending resonance, the robot exhibits directional locomotion. A proposed contact modulation mechanism relates the structural response to possible changes in foot–ground contact conditions and the distribution of sticking and slipping over each cycle. A nonlinear electromechanical–contact model combines Euler–Bernoulli beam dynamics, modal reduction, geometric foreshortening, and a normal-load-modulated LuGre friction law. Finite element analysis is used to evaluate substrate material and geometric parameters, while experiments assess displacement response, frequency tolerance, bidirectional motion, load capacity, turning, slope locomotion, and surface adaptability. Under a reference excitation condition of 100 V and an 80% waveform asymmetry ratio, the robot reaches 36.26 mm/s at 925 Hz and retains at least 80% of its peak speed from 775 to 925 Hz within the selected frequency range at or below the optimal operating point, corresponding to a one-sided 80% speed-retention operating bandwidth of B80 = 150 Hz. Continuous locomotion is also maintained under a 50 g load and on different contact surfaces. These results indicate that coupling resonant piezoelectric composite-beam dynamics with contact modulation provides a practical route to reducing the frequency sensitivity of miniature resonant robots.
No takes yet. Share an insight, caveat, or question.
Long et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: