Answers are grounded in this paper and cite their sources.
Compact coil design for electromagnetic energy harvesters under low-speed rotation requires balancing output performance and winding volume. This study proposes a structural screening method guided by the gradient of flux linkage for a gravity-driven linear electromagnetic harvester with a freely moving magnet. The structural metric, Γ=I_λ/R_c, combines the integral of the squared gradient of flux linkage over magnet travel with winding DC resistance, enabling preliminary coil ranking without requiring the complete magnet velocity history. A 2D axisymmetric magnetostatic model was used to evaluate 662 valid coil designs with different turn numbers, wire diameters, and axial lengths. An upper envelope of Γ versus winding volume was constructed to identify a representative compact design. Five coils were fabricated and tested at 10, 18, 30, and 43 rpm. The Spearman rank correlation coefficients between Γ and measured maximum average load power ranged from 0.80 to 1.00, exceeding those obtained using individual structural and electromagnetic quantities. The reference design C5 achieved about 28.6mW at 43 rpm. Compared with C5, the representative compact design C4 reduced winding volume by 33.2% while retaining 93.1%–98.8% of the output power at 18, 30, and 43 rpm. At 10 rpm, C4 produced slightly higher power. These results support the use of Γ as a structural prescreening metric for balancing power performance and coil size.
No takes yet. Share an insight, caveat, or question.
Zhen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: