Answers are grounded in this paper and cite their sources.
This paper introduces and experimentally validates a footprint-normalized performance framework for evaluating pole-mounted photovoltaic systems, extending capacity-based assessment to the spatial constraints of real-world deployment. The experimental basis is one full year of outdoor field testing in Doha, Qatar. Five configurations were monitored simultaneously at one-minute temporal resolution: (a) back-contact and (b) bifacial multi-busbar modules at 22° tilt, (c) back-contact and (d) bifacial multi-busbar vertical modules, and (e) an octagonal Vertical Photovoltaic Tube. A footprint-normalized yield coefficient, k_FP (Wh m −2 per kWh m −2 ), was derived for each configuration through origin-constrained least-squares regression of daily energy density against irradiation, enabling direct comparison of productivity per unit of ground area rather than installed capacity. The analysis spans three design scenarios (critical-load, economic, and summer-seasonal) anchored at the minimum, mean, and maximum peak-sun-hour values (0.624, 5.796, and 8.677 kWh m −2 day −1 ). A systematic inversion of rankings emerges between capacity-based and footprint-based metrics: tilted bifacial modules achieve the highest yield per rated peak power (Wp), yet the Vertical Photovoltaic Tube achieves higher energy density per unit of ground area owing to its compact octagonal geometry. This advantage persists across all three scenarios and in every season, although its size relative to the vertical flat-plate configurations varies with season (about 1.4 to 3.7 times), so the inversion arises from module geometry but is not independent of the operating condition. The tube requires a 9.6-fold smaller ground area than the bifacial 22° configuration and an 11.4-fold smaller area than the back-contact 22° configuration for critical-load off-grid sizing in Qatar. The framework offers a field-validated basis for treating land-use efficiency as a design criterion alongside energy yield in pole-integrated photovoltaic systems.
No takes yet. Share an insight, caveat, or question.
A’amar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: