Answers are grounded in this paper and cite their sources.
This study presents a unified theoretical comparison of three-wheel and four-wheel omnidirectional mobile robots with regular wheel arrangements, focusing on kinematic isotropy, support geometry, acceleration-induced load transfer, and friction feasibility. Although both configurations provide three degrees of freedom in planar motion, the four-wheel mechanism introduces two distinct forms of redundancy: passive redundancy associated with the indeterminate distribution of normal wheel loads and active redundancy arising from redundant driving-force allocation. These two forms of redundancy are formulated separately to clarify their physical roles and effects on contact and friction performance. Under a prescribed reference normal-load distribution, conventional driving-force allocation based on the Moore–Penrose pseudoinverse is compared with an allocation that minimizes the maximum friction utilization among the wheels. Both configurations exhibit Euclidean-norm isotropy of the pure-translation Jacobian. Although four wheels enlarge the geometric support region, this does not necessarily improve all-wheel contact feasibility or reduce friction requirements. For the sampled conditions with ζ=0 and a friction threshold of 0.30, the fraction of all grid points satisfying both contact and friction criteria increased from 37.41% to 77.88% through friction-optimal allocation. The results are based on a quasi-static model. The proposed framework provides a theoretical basis for selecting wheel configurations and evaluating redundant driving-force allocation in omnidirectional mobile robots.
No takes yet. Share an insight, caveat, or question.
Kenji Kimura (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: