Answers are grounded in this paper and cite their sources.
A novel weaving technique, in which glass, carbon, or combined glass–carbon strands are woven through the steel-mesh openings in a row-skip pattern, is introduced to mechanically anchor metallic reinforcement within hybrid fiber–steel-mesh laminates and counter the abrupt tensile failure typical of fiber-reinforced polymers lacking a ductile secondary phase. Prior steel-mesh hybrid studies compare only a single weave type against an unwoven baseline, leaving the relative contribution of different strand materials unresolved, and no validated multi-criteria framework exists for ranking these tensile trade-offs. This study fabricates five laminates: an unreinforced glass baseline (G), an unwoven steel-mesh hybrid (S), and three woven hybrids (GS, CS, and CGS), tested under ASTM D3039. Woven hybrids restored 22–27% of the lost strength in S and improved toughness by 2–18%, while doubling the tensile modulus relative to S, with a gain of up to 117.89%. Entropy-weighted COPRAS and TOPSIS were applied here for the first time to a weaving strategy design variable, both ranked CGS first, followed by CS, GS, and S, with sensitivity analysis confirming stability once modulus weighting exceeds 30%. The findings support mechanical interlock as the most probable strengthening mechanism and identify CGS as the highest-ranked configuration for tensile-dominated structural design in which stiffness is prioritized.
No takes yet. Share an insight, caveat, or question.
Ali Sadoun (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: