Answers are grounded in this paper and cite their sources.
Triply periodic minimal surface (TPMS) structures are of interest as lightweight cores for protective building components, but their geometric design must balance energy absorption with stable deformation. This study examines the effects of relative density and unit cell size on Gyroid (G) and Diamond (D) structures manufactured from polylactic acid (PLA). Quasi-static compression tests, finite element analysis, and digital image correlation were combined to compare load responses, collapse modes, and energy absorption. Relative densities ranged from 30% to 50%, and unit cell sizes ranged from 6 to 14 mm. Increasing relative density from 30% to 50% raised total energy absorption by 211.23% for G-type structures and 210.77% for D-type structures. The corresponding increases in specific energy absorption were 65.65% and 107.16%. G-type structures collapsed progressively in horizontal layers, whereas D-type structures developed diagonal shear bands and achieved higher total and specific energy absorption within the tested range. In the cell-size series, the number of cells remained fixed, so increasing cell size also enlarged the specimens. The resulting increase in total absorbed energy therefore reflects overall geometric scaling as well as cell size. Larger cells were also associated with earlier densification and less continuous collapse. These results identify a practical trade-off between absorbed energy and deformation stability, and provide a comparative basis for developing TPMS cores for protective construction components.
No takes yet. Share an insight, caveat, or question.
Xuelian et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: