Answers are grounded in this paper and cite their sources.
To recover the waste heat of the proton exchange membrane fuel cell (PEMFC) system, a fuel cell vehicle (FCV) cabin heating system was proposed, and a numerical model was constructed using the AMESim platform to investigate its thermal properties. Besides, the effects of a single factor and multiple factors, considering air temperature, heat transfer coefficient, radiator inlet air velocity, and water pump speed on the power consumption of the FCV cabin heating system, were evaluated with different cabin target temperatures. Finally, the power consumption concerning the FCV cabin heating system was predicted using a kernel extreme learning machine (KELM) model, and the crested porcupine optimizer (CPO) algorithm was proposed to optimize it. Results indicate that the constructed numerical model is efficient with the maximum relative error between experimental data and simulation results being 4.69%, air temperature and heat transfer coefficient play more important roles in influencing the power consumption of FCV cabin heating temperature, and regulating radiator inlet air velocity and water pump speed can balance waste heat recovery (WHR) efficiency with the entire power consumption at cabin target temperatures. Moreover, when the cabin target temperature is set to be 35°C, 40°C, and 45°C, the minimum power consumption of the FCV cabin heating system optimized with the CPO algorithm is 153.4, 107.3, and 45.2 W, respectively, which is reduced by 5.37%, 9.98%, and 11.89% compared to the ones without optimization. This work provides a new insight into the WHR of PEMFC systems applied in FCVs.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: