Answers are grounded in this paper and cite their sources.
Stearic-acid-modified TiO₂ (SA–TiO₂)/polydimethylsiloxane (PDMS) coatings were spray-deposited on glass to examine how powder loading affects water repellency and optical transmission. Sol–gel-derived TiO₂ was treated with stearic acid and added at 0.1–0.5 g to a fixed PDMS formulation. XRD, FTIR, AFM, FE-SEM, EDX, UV–Vis and wetting measurements were combined. Anatase was the dominant phase, with an apparent mean Scherrer domain size of 18.04 nm. Mean areal RMS roughness across two fields rose from 0.47 nm for PDMS to 119.80 nm for the 0.5 g coating (E). Its water contact angle was 160 ± 2° and sliding angle 5 ± 1°. Droplets of aqueous dye solutions exhibited contact angles of 149–153°, and the water contact angle remained at 148 ± 2° after 25 tape-peeling cycles. A single rinsing sequence visibly displaced deposited particles. Mean unweighted transmittance over 400–700 nm was 5.70–11.79% for particle-containing coatings, indicating a wetting–transmission trade-off.
No takes yet. Share an insight, caveat, or question.
Sabbar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: