Answers are grounded in this paper and cite their sources.
In this study, hafnium dioxide (HfO2) nanoporous were fabricated with electrochemical anodizing method from Hf thin film coated onto glass using the DC sputtering method. The electrochemical anodizing process was carried out at a voltage of 60 V, with Pt as the cathode and Hf film as the anode. An ethylene glycol solution containing 0.25 % NH4F and 20 % pure water by weight was used as the electrolyte. Morphological characterization of HfO2 nanoporous was completed by performing FESEM, XRD, EDX, UV-Vis, and XPS analyses. According to XRD patterns, the HfO2 nanoporous, which initially had an amorphous structure, transformed into a monoclinic crystalline structure after annealing at 550 °C under dry air. UV-Vis results showed that the direct band gap energies of the annealed and asprepared HfO2 nanoporous were are 5.58 and 5.38 eV, respectively. Asprepared and annealed HfO2 nanoporous samples were coated with Pt point contacts to produce sensor devices. Electrical measurements of both asprepared and annealed devices were taken as a function of temperature, and annealing was found to have a positive effect on electrical characterization. The average sensor response variation was calculated as 123.7 (+/- 5%) exposed to 1% H2 at a temperature of 150 °C. The hydrogen gas sensor detection properties of the Pt/HfO2 nanoporous device were improved and annealed HfO2 nanoporous has attracted attention as a promising material for future studies.
No takes yet. Share an insight, caveat, or question.
Taşyürek et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: