Answers are grounded in this paper and cite their sources.
This work presents a comprehensive electrothermal analysis of power loss and junction temperature in a 400V/200V, 3 KW DC-DC buck converter operating at switching frequencies from 50 to 200 kHz for electrical vehicle (EV) charging applications. The performance of a GaN systems GS66508B gallium nitride (GaN) is evaluated and compared with a silicon (Si) STMicroelectronics STP11NM80 MOSFET and a silicon carbide (SiC) Wolfspeed C3M0120065D MOSFET under identical converter topology, passive component values and operating conditions. The converter employs an inductance of 270μH and an output capacitance of 100μF. Semiconductor power losses are evaluated using LT spice considering conduction and switching loss components. The conduction loss is calculated from the RMS drain current and on-state resistance, while turn-on and turn-off switching energies are obtained directly by integrating the simulated vDS.iD waveforms, thereby avoiding idealised linear switching transition assumptions. At the baseline operating point of 400 V input, 100 kHz switching frequency and 3 kW rated load, the calculated semiconductor losses are 7.5126 W, 19.6845 W and 47.8417 W for GaN, SiC and Si, respectively, with corresponding simulated converter efficiencies of 99.75%, 99.34% and 98.39%. The calculated semiconductor losses are applied as a dynamic heat source to Cauer RC thermal network comprising junction-to-case, case-to-heatsink and heatsink-to-ambient elements to accurately estimate the transient junction temperature (Tj) under varying switching frequencies. The GaN device shows the lowest semiconductor power loss and junction temperature under specified operating conditions, indicating its potential for high frequency EV charging applications.
No takes yet. Share an insight, caveat, or question.
Ponnambalam et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: