Answers are grounded in this paper and cite their sources.
The Press and Blow molding process often produces uneven mold surface temperatures, leading to quality defects and high energy usage. This study experimentally and numerically investigates manufacturable conformal cooling strategies with passive surface augmentations (dimples, ribs, and fins) that enhance thermal management in glass blank molds. Laboratory experiments and numerical simulations are used to assess the thermohydraulic performance, including heat transfer and pressure drop. The finned surface provided the greatest heat-transfer enhancement but also the highest pressure-drop penalty, whereas dimpled surfaces offered more moderate thermal gains at substantially lower hydraulic cost. Therefore, the selection of the cooling strategy involves a thermal–hydraulic trade-off that depends on the available blower capacity and required heat-removal rate. Industrial tests demonstrated the ability of fins to maintain mold surface temperatures approximately 30 °C lower than conventional designs and operated without observed mold-induced defects during the monitored production trial. Although finned channels imply greater hydraulic resistance, their substantial improvement in thermal efficiency and operational stability supports their short-term industrial feasibility, while extended production trials are required before assessing long-term reliability and broader industrial implementation.
No takes yet. Share an insight, caveat, or question.
Rosa et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: