Answers are grounded in this paper and cite their sources.
To investigate the effects of inlet pressure, load, and rotor moment of inertia on the start-up characteristics of a pump as turbine, 27 sets of calculation cases were established via full factorial design. Three factors with multi-gradient levels were selected, with start-up delay and rotational speed rise rate adopted as the analysis indicators. Through the analysis of single-factor main effects and multi-factor interactions, the influence of each factor was quantified. Meanwhile, a multiple linear regression model with interaction terms was constructed, and parameter optimization was realized in combination with a comprehensive scoring mechanism. The results show that the order of influence on the rotational speed rise of pump as turbine during start-up is inlet pressure, moment of inertia, and load. The interaction effects among the three factors are generally weaker than single-factor main effects with obvious magnitude differences: only the inlet pressure-load torque interaction exerts a significant moderate impact on start-up delay and rotational speed overshoot, with contribution rates of 12.07 % and 14.23 % respectively; the other pairwise interactions contribute less than 10 % to all start-up indicators, and their contribution rates to rotational speed rise rate are all below 1 %. The fitting coefficients of the established regression model are all above 0.94; the optimal parameter combination screened by the comprehensive scoring is 1800 kPa, 10 N·m, and 0.001 kg·m 2 . This study provides a reference for the parameter optimization of pump as turbine during the start-up process.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: