Answers are grounded in this paper and cite their sources.
Compact silicon-on-insulator (SOI) wavelength-division multiplexing (WDM) demultiplexers require low-loss routing and small footprints. We assess selective replacement of nominal 50:50 input directional couplers by adiabatic Y-splitters in cascaded Mach–Zehnder interferometer filters, retaining directional couplers for nonuniform splitting and recombination. Four eight-channel Y-assisted designs with Gaussian-like or Flat-top responses at 1550 and 1310 nm and 3.2 nm channel spacing were compared with corresponding directional coupler references using finite-difference time-domain component S-parameters and distributed waveguide attenuation. At nominal geometry, the Y-assisted filters achieved lower worst-channel insertion loss in all four comparisons (0.590–3.068 dB), minimum absolute unwanted-port suppression above 15 dB, and 16.95–37.98% smaller layout bounding-box areas. Flat-top synthesis increased the 1-dB passband width by approximately 56% relative to Gaussian-like designs. Systematic ±10 nm width deviations caused fitted common spectral shifts with magnitudes of 2.86–6.23 nm and disrupted nominal-grid channel routing. Following numerical spectral registration, Y-assisted filters retained higher normalized spectral-profile similarity than their references. Impairment-aware simulations at 25 Gb/s per channel yielded open eye diagrams for all channels of the nominal Y-assisted filters, with worst-channel Q-factors of 5.12–11.38. These simulation-based benefits do not establish fabrication-tolerant fixed-grid operation.
No takes yet. Share an insight, caveat, or question.
Ocampo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: