Answers are grounded in this paper and cite their sources.
The expansion of IoT and latency-sensitive applications has driven the adoption of Fog Computing, which pushes computational resources to the network edge. The performance of such infrastructures depends critically on the underlying optical access network. This study evaluates FTTH WDM-PONs for interconnecting Fog nodes in urban environments by comparing star and tree topologies through OptiSystem simulations. Performance was assessed via Q-factor, BER, and eye diagrams under varying power (−7 to +5 dBm), distance (5 to 150 km), and bit rate (2.5 to 100 Gbit/s). At 10 Gbit/s, both topologies achieve excellent performance up to 25 km (Q > 15, BER < 10−50), and maintain acceptable performance up to 50 km (Star: Q ≈ 10.1, Tree: Q ≈ 8.5). However, beyond 50 km, the cascaded filtering of the tree topology causes rapid signal degradation, falling to Q = 0 at 80 km, while the star topology maintains a degraded signal (Q ≈ 2.35) up to 80 km. At higher bit rates, both topologies are limited by the AWG passband, with severe degradation at 50 Gbit/s. At 100 Gbit/s, the star topology fails completely, while the tree topology maintains only a marginal, degraded signal. These results demonstrate that the star topology is the preferred choice for extended-reach critical Fog applications requiring high reliability, while the tree topology is limited to shorter distances despite its lower insertion loss. We provide practical recommendations for network operators regarding topology selection and node positioning for FTTH-based Fog Computing deployments in urban areas.
No takes yet. Share an insight, caveat, or question.
Benadla et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: