Answers are grounded in this paper and cite their sources.
Background: Thread-applied adhesives may affect abutment screw removal torque. Purpose: To compare post-loading removal torque among four screw-thread treatments. Materials and methods: This exploratory in vitro study randomly allocated 40 implant–abutment assemblies (n=10 each) to experimental adhesives containing 30 or 40 wt% methyl methacrylate (MMA30 and MMA40, respectively), a commercial anaerobic threadlocker, or no adhesive (control). Screws were tightened to 30 N·cm twice, 10 minutes apart. After 24 hours, assemblies underwent 1,000,000 cycles at 75 N and 2 Hz. A blinded assessor measured peak removal torque. Welch analysis of variance and Games–Howell comparisons (α=0.05) were supplemented by leave-one-out and 20% trimmed-mean analyses. Results: Mean (standard deviation) removal torque was 37.55 (12.52), 26.60 (1.83), 25.45 (4.91), and 21.80 (0.74) N·cm for MMA30, MMA40, commercial threadlocker, and control, respectively. Groups differed overall (Welch p < 0.001). MMA30 and MMA40 exceeded control (adjusted p = 0.014 and p < 0.001); other primary comparisons were nonsignificant. Both contrasts remained significant in all 40 leave-one-out analyses (maximum adjusted p = 0.035) and trimmed-mean analyses (Bonferroni-adjusted p = 0.005 and 0.002, respectively)—additional contrasts varied by approach. Conclusions: Both experimental preparations increased postloading removal torque under the tested conditions. These findings do not establish formulation-wide reproducibility or clinical benefit.
No takes yet. Share an insight, caveat, or question.
Arshad et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: