Answers are grounded in this paper and cite their sources.
Current trends in miniaturization of electronic equipment together with increasing reliability requirements impose new and more stringent demands on the mechanical properties of microwave ceramics. The effect of aluminum oxide nanofibers (γ-Al 2 O 3 ) addition on the mechanical strength and microwave dielectric properties of Ba 0.96 Sr 0.04 (Sm 0.8 Nd 0.2 ) 2 Ti 4 O 12 was studied. Experimental samples were prepared by the solid-state method using barium and strontium carbonates, oxides of titanium, samarium and neodymium as starting materials. Calcination was carried out at 1150°C, while sintering was performed at 1400°C. To improve the mechanical strength of the ceramics, aluminum oxide nanofibers were introduced during grinding of the ceramic mixture in amounts of 0.1 – 0.2 % wt. X-ray diffraction analysis showed that the obtained ceramic samples were single-phase and had an oxide pseudo-tungsten bronze structure. The addition of 0.1 % wt. nanofibers reduced the porosity of the ceramic material (from 5.0 to 4.0%) relative to the undoped material, which led to an increase in flexural strength (from 172 to 202 MPa). The permittivity and dielectric loss tangent decreased slightly (from 78.0 to 77.0 and from 4.0 × 10 –4 to 3.9 × 10 –4 ) while the temperature coefficient of resonant frequency shifted toward negative values (from –0.63 to –7.37 ppm/K) with the addition of the nano-additive. It was found that aluminum oxide nanofiber addition (γ-Al 2 O 3 ) has a significant effect on the mechanical and dielectric properties of Ba 0.96 Sr 0.04 (Sm 0.8 Nd 0.2 ) 2 Ti 4 O 12 ceramics. The obtained results can be used in the production of ceramic components for microwave devices to optimize their stability and reliability.
No takes yet. Share an insight, caveat, or question.
Shimanskii et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: