Answers are grounded in this paper and cite their sources.
This paper proposes and evaluates a mechanically consistent inverse analysis procedure for deriving an idealised uniaxial tensile response of strain-hardening fibre-reinforced concrete from four-point bending prism tests. In contrast to a conventional point-by-point reconstruction, the measured flexural states are treated simultaneously in an overdetermined least-squares problem to identify a compact piecewise linear tensile stress–strain relationship. Two practical variants are considered: a reference formulation using the measured neutral-axis position and a simplified formulation in which the neutral-axis history is recovered iteratively from a known compressive elastic modulus. The strain-node abscissae can also be optimised by minimising the flexural residual, so that only the desired constitutive resolution needs to be prescribed. The approach is assessed using 18 four-point bending tests on Ductal® UHPFRC prisms of two geometries, with high-resolution digital image correlation used both as input and to test the underlying kinematic assumptions. The method reproduces the measured flexural response and identifies the strain-hardening range robustly with only a few constitutive nodes. After localisation, the stress–strain branch is interpreted as a gauge-length-dependent regularised response and can be recast as an equivalent stress-crack opening relationship for design-oriented use. Provided that a reliable elastic modulus is known, practical pre-localisation characterisation can be obtained from a single high-resolution displacement measurement on the tension side.
No takes yet. Share an insight, caveat, or question.
Gehri et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: