Answers are grounded in this paper and cite their sources.
Solvent-free dry battery electrode (DBE) manufacturing is emerging as an attractive route for lithium-ion battery (LIB) production but inherently generates characteristic scrap streams such as edge-trims and cut-outs from free-standing electrode films that need to be recycled to realize its economic and environmental benefits. Here, we investigate a purely mechanical direct recycling approach for NMC91-based cathode trimmings produced via PTFE-based dry coating. Trimming scrap is reprocessed by impact milling under low- and high-impact conditions and subsequently re-calendered into electrodes fabricated from 100 % recycled material. The influence of recycling intensity on powder and electrode properties is analyzed by SEM, BET, micro gas chromatography, and electrochemical testing in single-layer pouch cells. We show that the milling intensity decisively controls the integrity of the recycled powder mixture, and thereby governs the mechanical stability, electrode resistance, and cycling behavior of the recycled electrodes. Under appropriately mild conditions, recycled material yields electrodes with performance comparable to pristine cathodes, whereas aggressive milling leads to pronounced degradation during cycling. These results demonstrate that DBE trimming scrap can, in principle, be returned as feedstock for new cathodes and show that, within the investigated mill and operating conditions, sufficiently mild mechanical stressing is compatible with long-term cell performance.
No takes yet. Share an insight, caveat, or question.
Wagner et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: