Synapse
⌘+K
Synapse
PulseExploreClubsResearchersJournals
Instagram
HomeClubsExplore
September 16, 2025MetalsOpen Access

Effect of Adding TiZr-Based Amorphous Interlayer Through Electron Beam Welding on the Microstructure and Properties of Ti/Al Joints

View Full Paper
Ask AI
Bookmark
Share

Authors

LCLei ChenBZBo ZhangJiujiang UniversityRXRongzheng XuShenyang Aerospace University

Discussion

Loading...

Member takes

Implication

Experimental analysis shows improved tensile strength in Ti/Al welded joints while controlling intermetallic compounds.

Key Points

  • Incorporating the amorphous interlayer yielded a maximum tensile strength of 94.8 MPa in welded joints.
  • The interlayer reduced the thickness of intermetallic compounds, with the layer in the lower part measuring only 1-2 μm.
  • A significant amount of small-sized Ti-Al and Al-Zr intermetallic compounds formed, enhancing the performance of the joints.
  • Offsetting the electron beam during welding effectively controlled interfacial reactions and IMC formation.

Cite This Study

Chen et al. (2025) studied this question.

synapsesocial.com/papers/68d454d831b076d99fa5a9ddhttps://doi.org/10.3390/met15091001
View Full Paper
Ask AI
Bookmark
Share