Answers are grounded in this paper and cite their sources.
AC treatment improves electrical properties and microstructure in Cu thin films, suggesting potential for semiconductor applications.
This study investigates the effects of high-frequency alternating current (AC) treatment on the microstructural evolution and electrical properties of electron-beam-deposited Cu thin films. After 60 min of AC treatment at a frequency of 500 kHz, the resistivity of the Cu thin films decreased to 97.9%, 95.6%, and 94.1% of their initial values at current densities of 30, 40, and 50 kA/mm², respectively. COMSOL simulations confirmed that the maximum temperature rise did not exceed 50 °C, demonstrating that the process was dominated by the applied current rather than thermal effects. Quasi-in-situ electron backscatter diffraction results revealed that, under the 50 kA/mm² condition, AC treatment increase the average grain size from 0.263 µm to 0.432 µm and reduced kernel average misorientation from 0.595 to 0.540. Unlike conventional thermal annealing, which relies on random atomic diffusion, AC treatment imparts a directional driving force that enhances the <101> texture in the current direction. These findings demonstrate that high-frequency AC treatment is an efficient, non-thermal processing method that can enhance crystallinity and electrical conductivity of Cu films under near-room-temperature conditions (below 50 °C). In addition, this approach offers controllable regulation of grain orientation, indicating strong potential for applications in semiconductor interconnects, microelectronics, and advanced thin-film technologies.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: