Answers are grounded in this paper and cite their sources.
Civil construction courses have laboratories for the development of educational activities. The activities involve the production of construction elements that require the consumption of treated water to prepare materials and wash equipment, generating liquid effluents at the end of each class. The reuse of liquid effluents generated in the civil construction educational laboratory was studied with the aim of reducing the demand for treated water and reducing the liquid waste discharged into the public sewage system. The effluent generated was collected, quantified and treated by primary decantation, generating reused water. Concrete was produced with reused water as a replacement for treated water, with contents of 20, 50, 80 and 100% and compared to the control concrete, 100% treated water. Parameters of axial compression strength and durability by natural carbonation were evaluated. Concretes with up to 50% reused water presented the same carbonation as the control concrete, and concretes produced with 80 and 100% reused water presented carbonation (2.5 mm), a result slightly higher than the carbonation of concretes produced with up to 50% reused water (1.5 mm). Considering the test results, it can be concluded that it is possible to reuse up to 50% of the reused water in the production of concrete without compromising mechanical resistance and durability. For educational purposes, it is possible to use 100% of the reused water produced, that is, pure, contributing to sustainability and with the guarantee that such use does not cause any harm to the health of teachers, technicians or students. It should also be considered that such use becomes efficient and can be an alternative to treating the waste and its subsequent release into the public network or directly into nature.
No takes yet. Share an insight, caveat, or question.
Pittol et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: