Answers are grounded in this paper and cite their sources.
Aluminium oxide (Al2O3) thin film has significant applications in optoelectronic devices due to its excellent photoelectric properties.To investigate the effect of deposition temperature on the photoelectric properties of ALD-Al2O3 films, samples with different deposition temperatures were prepared on silicon and K9 glass substrates using atomic layer deposition (ALD).The crystal structure and surface morphology of the samples were characterized using X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively.The thickness, refractive index and extinction coefficient of the films were measured by spectroscopic ellipsometry (SE) in the wavelength range of 275~800 nm and fitted by Tauc-Lorentz (T-L) model.The fitted thickness and bandwidth results were verified using scanning electron microscopy (SEM) and ultraviolet-visible (UV-VIS) absorption spectroscopy.The results show that the surface of the ALD-Al2O3 film is smooth and dense at low temperatures.The surface roughness was approximately 0.3 nm, which was measured with AFM, and this value differs from the SE fitting results due to the local minimum obtained by SE, while the AFM test is a global minimum.The growth rate of 100cycles sample is about 0.1 nm/cycle, and the band gap is about 3.30 eV by SE.The 500cycles sample thickness is 54.9 nm measured by SEM, and the band gap is about 3.25 eV by UV-VIS extrapolation.The accuracy of the fitted model is verified by the correspondence between the fitted and test results.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: