Experimental Investigation and Classification of Wastewater Treatment Sludge as Pozzolan for Cement

This paper presents an investigation conducted to evaluate wastewater treatment sludge for potential use as a cement extender or pozzolan. Two varieties comprising the digested wastewater sludge (DWWS) and activated wastewater sludge (AWWS) materials, were finely ground then calcined at 750 °C for 30 min. Subsequently, the calcined sludge waste materials were blended with ordinary Portland cement CEM I 52.5 N at 0, 10, 20, 30% DWWS or AWWS, and used to prepare mortar mixtures at proportions of 1:3:0.61 cement to sand to water. Various tests were conducted including workability, compressive strength, pozzolanic activity with lime, drying shrinkage and alkali-silica reaction. It was found that both varieties of the sludge waste materials, once blended with CEM I at 20% DWWS or 20% AWWS, satisfied the ASTM C618 criteria for Class C pozzolan, and may be classified as CEM II /A-P 32.5 N,R cement type of EN 197-1/SANS 50197-1. The overall performance of DWWS was relatively better than that of AWWS.