Answers are grounded in this paper and cite their sources.
Laser-welded tailored blanks are useful for lightweight automobiles. However, three major problems remain unresolved: low joint strength, low formability, and galvanic corrosion. Although considerable research has been conducted on the lap form, the studies on the use of lasers to weld dissimilar metals in the butt form are scarce. For practical applications of dissimilar metal tailored blanks, formability must also be investigated. In this study, Japan Industrial Standard A1050-O aluminum and SPCC steel were welded as dissimilar metal tailored blanks and used for Erichsen, flat punch stretch, and hole expansion tests. Welded materials with different joint strengths were produced to investigate the correlation between joint strength and formability. Two patterns of fracture owing to differences in joint strength were observed during the flat punch stretch test. The results of the formability test confirmed that the formability improved with an increase in the joint strength.
No takes yet. Share an insight, caveat, or question.
Jianchen Jin (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: