Answers are grounded in this paper and cite their sources.
The car body construction is made from workpieces on which specific demands are put. The high stiffness and strength, low weight, programmable deformability is achieved by using of tailored welded blanks (TWBs). The weld joint is most commonly realized by a laser weld with a narrow heat affected zone (HAZ). The formability of TWB is affected by the weld, stress-strain characteristics of materials and process conditions. For the analysis of TWBs, materials with the same thickness, but different orientation of the texture of the individual parts with respect to the position of the weld, were used. The effect of surface anisotropy of individual materials on formability was studied in terms of the origin and direction of crack propagation during deep drawing or tension test. The sensitivity of individual materials to the presence of a weld, the formation of a crack and the course of changes in microhardness in the weld and HAZ was evaluated. The obtained results are important in the design of TWB from the point of view of the presence of a weld and the orientation of the texture of individual parts of the TWB in relation to local limit strains and the risk of cracks formation.
No takes yet. Share an insight, caveat, or question.
Schrek et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: