Answers are grounded in this paper and cite their sources.
This analysis develops a control strategy to enhance trajectory tracking in intelligent vehicles during lane changes, suggesting improved safety and efficiency.
In-wheel motor-driven systems offer precise torque control and yaw moment compensation, enabling rapid vehicle state adjustments to facilitate lane-changing and obstacle avoidance maneuvers, thus providing an effective platform for vehicle dynamics control research. To address the prediction accuracy issues of dynamically interacting vehicle trajectories during high-speed lane-changing obstacle avoidance scenarios, as well as challenges including increased trajectory tracking errors and stability control degradation, this study developed a lane-changing obstacle avoidance control strategy based on LSTM interactive vehicle trajectory prediction. The system integrates: a lateral MPC trajectory tracking controller, a longitudinal LQR speed tracking controller, a coordinated sliding mode controller for front wheel angle-drive torque synchronization based on phase plane and stability determination coefficients, and a torque distribution controller based on tire adhesion optimization and multi-constraint optimization. Validation was performed through Prescan/Simulink/Carsim co-simulation under typical operating conditions. The results demonstrate, the trajectory prediction accuracy meets the requirements; the maximum lateral position deviation decreases from 0.29 to 0.11 m, and the peak deviation between the tracked centroid sideslip angle and its desired value reduces from 1° to 0.48°. Compared with the baseline control strategy, these metrics show 62% and 52% reductions respectively, achieving significant improvements in trajectory tracking precision and stability.
No takes yet. Share an insight, caveat, or question.
Fu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: