Answers are grounded in this paper and cite their sources.
This analysis investigates the joint resistance in B0 model coils, indicating important construction behaviors.
The ATLAS Barrel Toroid (BT) consists of 8 superconducting coils of 25 m length and 5 m width, it provides the magnetic field for the muon spectrometer of the ATLAS detector, one of the experiments of the Large Hadron Collider, under construction at CERN. The cable used for the coils is an Aluminum stabilized NbTi rutherford cable and the coils are built with the double pancake technique, so a resistive joint between the cables of the two single pancake is present. The transverse magnetic field induces eddy currents, during the ramping of the main current, whose intensity can sometimes exceed the transition limit. B0 is a one third length, full large scale model of one of the eight magnet composing the ATLAS barrel toroid. The B0 construction was decided to test the technical construction solutions and reproduce the behaviour of the final coils. In this paper the behaviour of the interpancake joint is analyzed and compared with theoretical models describing the current distribution at the joint. Measurements of the joint resistance are reported.
No takes yet. Share an insight, caveat, or question.
F. et al. (2002) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: