Answers are grounded in this paper and cite their sources.
Determines the normal zone dimensions in a superconducting coil, implying its behavior under different currents.
The ATLAS Barrel Toroid (BT) is a superconducting toroid made of 8 coils of 25 m length and 5 m width, providing the magnetic field for the muon spectrometer of the ATLAS detector, one of the experiments of the Large Hadron Collider, under construction at CERN. In addition to the BT the ATLAS magnetic structure foresees two End Cap Toroid (ECT) with the same 8 structure geometry of the BT, and a Central Solenoid (CS). The B0 construction was decided to test the technical construction solutions and reproduce the behavior of the final coils. The most powerful diagnostic sensors for studies of the quench propagation are the pick-up coils. In this paper a short description of the characteristics of the pick-up coil signal, related to the quench propagation and to the current diffusion from the conductor to the stabilizer is given. Then, from the quench propagation velocity and the pick-up coil signal characteristics, the dimensions of the Normal Zone (NZ), the transited part of the cable, is determined, for different values of the main current in the magnet. The determination of the NZ dimensions is influenced by some experimental parameters, error affected, and by some assumptions. Because of these assumptions the NZ dimensions determined are only indicative, more precise measurements are not so far possible.
No takes yet. Share an insight, caveat, or question.
Broggi F. (2002) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: