Answers are grounded in this paper and cite their sources.
Testing validates a new acquisition system for electrical signals in B0 coils, suggesting improved design solutions.
In the frame of the ATLAS collaboration, the LASA Laboratory had to provide the acquisition system for the electrical signals from the B0 model coil. B0 is a full scale model, one third length of ATLAS barrel toroid eight coils. The B0 construction was decided to test the technical construction solutions and reproduce the final coils behaviour. Two types of electrical signal must be handled, the isolated and the non-isolated ones. The isolated signals, for example, come from the inductive pick-up coil, while the non isolated signals are the ones coming directly from the cable.In order to interrupt the ground loops, reject the common-mode voltage, the electromagnetic noise and to protect the acquisition system from overvoltages during a quench, galvanic insulation must be provided.In this paper the test performed on two existing insulating CERN cards (POTAIM and DVMM) are reported. Then a new card design, better fitting the acquisition electronicrequirements, is discussed.The design is validated by the utilization of the acquisition cards and system for the B00 tests. Typical signals from the B00 magnet are reported; the noise problem is discussed and the noise reduction solution is presented.
No takes yet. Share an insight, caveat, or question.
F. et al. (2002) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: