Answers are grounded in this paper and cite their sources.
Demonstrates the enhancement of PLA/CS composite properties with grafted compatibilizer, indicating promising material applications.
This study focused on the preparation and characterization of PLA/CS (polylactic acid/chitosan) composites. Owing to the inherently poor compatibility between PLA and CS, a compatibilizer PLA‐ g ‐CA was prepared using a melt grafting approach to graft citraconic anhydride (CA) onto PLA. This compatibilizer was subsequently introduced into the PLA/CS composites to enhance the interfacial compatibility between the two components. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance hydrogen spectroscopy ( 1 H NMR) analysis confirmed the successful grafting of CA onto the PLA molecular chains, with a maximum grafting rate of 1.55%. The effects of the grafting rates and contents of the compatibilizer PLA‐ g ‐CA on the mechanical, rheological, thermal, morphological, and antibacterial properties of the composites were systematically investigated. The results indicated that PLA‐ g ‐CA served as an effective compatibilizer for the PLA/CS composites. The PLA/CS composites with PLA‐ g ‐CA at a grafting rate of 1.45% and a content of 6 wt% exhibited the best performance, and the elongation at break, impact strength, Vicat softening temperature, and antibacterial rate against S . aureus increased by 49.2%, 62.5%, 13.5%, and 22.4%, respectively.
No takes yet. Share an insight, caveat, or question.
He et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: