Synapse
⌘+K
Synapse
PulseExploreClubsResearchersJournals
Instagram
HomeClubsExplore
April 3, 2026Russian Journal of Non-Ferrous Metals

Assessment of Microstructural, Mechanical and Wear Properties of Friction Stir Processed AA 5082/TiC Composite

View Full Paper
Ask AI
Bookmark
Share

Authors

MMManish MauryaDr. A.P.J. Abdul Kalam Technical UniversityAMAmbrish MauryaSKSudhir KumarWorld Healthal Trust

Discussion

Loading...

Member takes

Implication

Assessment shows improved mechanical and wear properties in AA 5082/TiC composites, indicating effective enhancements through friction stir processing.

Key Points

  • To assess the microstructural, mechanical, and wear properties of AA 5082/TiC composites produced via friction stir processing.
  • Developed AA 5082/TiC surface composite using friction stir processing
  • Varied reinforcement weight percentage from 2 to 10 wt %
  • Conducted scanning electron microscopy (SEM) for microstructural analysis
  • Performed mechanical tests including tensile strength, hardness, and wear evaluation
  • Tensile strength reached 372.23 MPa
  • Hardness measured at 73.8 BHN
  • Corrosion weight loss and wear were reduced compared to the base alloy
  • Uniform dispersal of ceramic particles was confirmed by SEM

Cite This Study

Maurya et al. (2026) studied this question.

synapsesocial.com/papers/69cf5f305a333a821460e27fhttps://doi.org/10.1134/s1067821225601431
View Full Paper
Ask AI
Bookmark
Share

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

  1. 1A study on microstructural, mechanical properties, and optimization of wear behaviour of friction stir processed AZ31/TiC composites using response surface methodology2024 · 32 citations
  2. 2Optimizing friction stir processing parameters for aluminium alloy 2024 reinforced with SiC particles: A taguchi approach of investigation2024 · 46 citations
  3. 3Experimental Analysis on Processing and Properties of Al-TiC Metal Matrix Composites2014 · 54 citations
  4. 4Synergistic impact of tool geometry and heat input on microstructure and texture development in friction stir processed AA6061-Graphene nanocomposites2025 · 30 citations
  5. 5Surface engineering strategies for realizing hexagonal boron nitride composite coatings for corrosion protection2025 · 5 citations