March 27, 2024Journal of Adhesion Science and Technology

Impact of friction stir welding parameters and Al 2 TiO 5 reinforcement on the mechanical, wear, and corrosion performance of dissimilar welded aluminium composite joints

View Full Paper

Ask AI

Bookmark

Authors

KSK. SenthilrajMahle (Austria)GRG. RajamuruganVellore Institute of Technology University

Discussion

Member takes

Implication

Experimental study reveals improved mechanical and corrosion performance in dissimilar aluminium composite joints, indicating optimal welding parameters refine microstructures.

Key Points

Optimal friction stir welding parameters combined with aluminum titanate reinforcement improve joint strength and corrosion resistance through grain refinement in the stir zone.
Tensile strength achieves 170.11 MPa alongside a low corrosion rate of 0.44 mpy when fabricated with two percent aluminum titanate reinforcement at moderate feed rates.
Mechanical and microstructural evaluation across varied rotational speeds indicates that tailored friction stir welding may enable durable dissimilar aluminium composite structures.

Cite This Study

Senthilraj et al. (2024) studied this question.

synapsesocial.com/papers/68e7220eb6db64358769bc8b https://doi.org/10.1080/01694243.2024.2331479

View Full Paper

Ask AI

Bookmark

Implication

Experimental study reveals improved mechanical and corrosion performance in dissimilar aluminium composite joints, indicating optimal welding parameters refine microstructures.

Impact of friction stir welding parameters and Al 2 TiO 5 reinforcement on the mechanical, wear, and corrosion performance of dissimilar welded aluminium composite joints

Discussion

Member takes

Implication

Key Points

Cite This Study

Impact of friction stir welding parameters and Al 2 TiO 5 reinforcement on the mechanical, wear, and corrosion performance of dissimilar welded aluminium composite joints

Discussion

Member takes

Implication

Key Points

Cite This Study

Also Consider

Also Consider