Answers are grounded in this paper and cite their sources.
This work presents the results of a comprehensive examination of the mechanical characteristics of the AA6063 hybrid composite joined using friction stir welding. The AA6063 hybrid composites were developed by using a 9% weight percentage (wt%) of boron carbide (B4C) and 4 wt% of graphite (Gr) microparticles using the stir casting process. Various welded samples were prepared using different rotational speeds (800, 1000, 1200 rpm), travel speeds (TSs; 40, 60, 80 mm/min), and tool tilt angles (TAs; 1, 2, 3°). The face-centered half factorial composite design of response-surface methodology was employed to obtain the design of the experiment of 15 trail runs. The results emphasize that the highest ultimate tensile strength (UTS) of 129.13 MPa was found in the sample welded at rotational speed, TS, and tool TA of 1000 rpm, 80 mm/min, and 2°, respectively. The highest recorded microhardness of 97.7 HV was significantly higher than that of the AA6063 matrix. Additionally, the highest % elongation of 7.4% was observed. The optimal processing parameters, including rotational speed, TS, and tool TA, were observed to be 1099 rpm, 80 mm/min, and 2.35°, respectively. The value of multi-response optimization, including microhardness, UTS, and % elongation, was observed to be 96.6 HV, 125.14 MPa, and 7.1%, respectively.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: