This is the authors' abstract. We don't add key points for this paper.
In this letter, AlGaN/GaN high electron mobility transistors (HEMTs) on a 6-inch Si substrate with excellent RF performance are presented for low voltage applications. Using regrown n+-InGaN ohmic contacts by metal-organic chemical vapor deposition, the ohmic contact resistance achieves an average value of <tex-math notation="LaTeX">0.08~Ω · </tex-math>mm on the whole wafer. With a gate length of 220 nm and a source-drain spacing of <tex-math notation="LaTeX">2.2~μ </tex-math>m, the device exhibits a saturation current of up to 1689 mA/mm and a peak transconductance of 436 mS/mm. Once the wafer was thinned to <tex-math notation="LaTeX">100~μ </tex-math>m, 3.6 GHz load-pull measurements for the HEMT with gate width ( <tex-math notation="LaTeX">Wg) </tex-math> of <tex-math notation="LaTeX">2× 100~μ </tex-math>m at low drain voltages ( <tex-math notation="LaTeX">Vd) </tex-math> of 5-15 V indicate that the device exhibits maximum output power densities ( <tex-math notation="LaTeX">P_ out, max ) </tex-math> of 0.86-4.35 W/mm and peak power added efficiencies (PAE) of 63.96%-66.23%, which are the highest output power density and PAE from AlGaN/GaN HEMTs at the same operating voltage level in sub-6GHz. Furthermore, the HEMT with <tex-math notation="LaTeX">Wg </tex-math> of <tex-math notation="LaTeX">8× 125~μ </tex-math>m also shows high PAE of 60.4%/61.19% and <tex-math notation="LaTeX">P_ out, max </tex-math> of 0.56/0.75 W/mm at <tex-math notation="LaTeX">Vd =5 </tex-math>/6 V. The excellent properties of these AlGaN/GaN HEMTs on Si illustrate their suitability for addressing specific RF application scenarios, including portable communication devices, wireless sensor networks and so on.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: