Answers are grounded in this paper and cite their sources.
Normally-off ferroelectric charge trap gate stack GaN high electron mobility transistor (FEG-HEMT) was fabricated with atomic layer etching (ALE) to precisely control the device parameters including <tex-math notation="LaTeX">Vₜₕ </tex-math> of the device. The ALE process consists of cyclic Cl2 adsorption modification steps and the Ar ion removal steps. The ALE process achieved etch-per-cycle (EPC) of 0.347 nm/cycle and superior etching morphology with RMS <tex-math notation="LaTeX">$=0.281$ </tex-math> nm. The fabricated GaN HEMT using the ALE process exhibited a high threshold voltage ( <tex-math notation="LaTeX">Vₜₕ </tex-math> ) of 5.06 V, high maximum drain current ( <tex-math notation="LaTeX">ID,MAX </tex-math> ) of 772 mA/mm with low on-resistance ( <tex-math notation="LaTeX">Rₒₙ </tex-math> ) of <tex-math notation="LaTeX">8.57~Ω · mm </tex-math> and high breakdown voltage (BV) of 888 V, the device also showed good <tex-math notation="LaTeX">Vₜₕ </tex-math> uniformity. Finally, the contact resistance ( <tex-math notation="LaTeX">Rc </tex-math> ) was reduced from <tex-math notation="LaTeX">0.46~Ω · mm </tex-math> to <tex-math notation="LaTeX">0.15~Ω · mm </tex-math> by the ALE process, and the dynamic on-resistance (dyn- <tex-math notation="LaTeX">Rₒₙ </tex-math> ) was improved at the same time.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: