Answers are grounded in this paper and cite their sources.
This research investigates the thermodynamic effects on alloy composition in titanium-aluminum-niobium synthesis, indicating implications for materials engineering.
Based on the thermodynamic design of metallurgical reduction, this paper investigates the thermodynamic principles and reaction regulation mechanism of aluminothermic self-propagating reduction for the in situ synthesis of a Ti45Al8Nb (at%) titanium–aluminum–niobium alloy. The influence of the aluminum distribution coefficient (ADC) on the self-propagating reaction process was verified via high-temperature thermal state experiments. The results show that the thermodynamically predicted trends of phase composition and alloy composition are consistent with the experimental results, with only a ~20% lateral offset in the ADC. When the ADC is set to 0.8, the mass fractions of Ti, Al, Nb, O, and N in the alloy are 51.8%, 29.5%, 17.4%, 1.2%, and 0.0016%, respectively, with a homogeneous microstructure and inclusion size no larger than 8 µm. The alloy presents a typical coarse-grained structure, where 83.1% of the total grain boundary length is low-angle grain boundaries, and the <111> orientation is dominant. A low-energy coherent interface is formed between the Ti-enriched and Nb-enriched regions by TiAl, TiAl3 and Al3Nb phases, which enhances the structural stability of the alloy.
No takes yet. Share an insight, caveat, or question.
Jiang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: