Answers are grounded in this paper and cite their sources.
Compares Agile-Chip prototypes with ASICs and various FPGAs, indicating competitive efficiency.
The Agile-Chip platform enables the rapid and low-cost development of ASICs by implementing the CPU, SRAM, I/O, and Gate Array in the lower metal layers of an LSI, and forming the upper metal layers using maskless lithography. Currently, a prototype called Agile-1L is available, which uses only the fifth metal layer for routing in a 0.18 μm CMOS process with 1P6M (1-Poly, 6-Metal). By utilizing Minimal Fab, the routing of the fifth metal layer can be completed in approximately 30 minutes. A method using both the fifth and sixth metal layers (Agile-2L) is also technically feasible. This approach competes with FPGAs—particularly one-time programmable Anti-Fuse FPGAs—in terms of enabling rapid chip prototyping. This study compares the performance and power consumption of Agile-1L and Agile-2L with those of conventional ASICs and three types of FPGAs: SRAM-based, flash-based, and Anti-Fuse-based. Although the currently available Agile-1L, which uses only a single routing layer, performs significantly worse than conventional ASICs in terms of performance and power, it is comparable to various types of FPGAs. Agile-2L, on the other hand, demonstrates characteristics closer to those of conventional ASICs and shows sufficient competitiveness when compared to existing FPGAs.
No takes yet. Share an insight, caveat, or question.
AMANO et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: